Holt LandWorks: is building a case for Eljen GSF septic systems. The Eljen Corporation has enjoyed successful growth over the past 4 decades. With success rates that far out paces some of its competitors. In doing so, Eljen’s Geotextile Sand Filter Systems have become a design of choice for many of Maine’s site evaluators. Since the first systems were installed over 40 years ago, Eljen has continued advancements in its products and manufacturing to meet their customers needs, as well as the needs of the environment.
So why would you chose Eljen?
The Eljen Story
Eljen systems are suitable for most any lot, however the GSF system excels when it comes to difficult lots, such as:
Sloping lots
Lots with high water tables
tight lots
Lots withpoor soils
With Eljen these lots become dream lots. With Eljen’s flexible design configurations, Holt LandWorks can install a system that, will preform for years to come and add value to your biggest investment, your home.
Septic system replacement is an expensive construction project no matter the system style you chose so make sure you talk this over with your site evaluator from the start. Other Septic system we install at Holt LandWorks are, pipe and stone drain fields, concrete chamber leach fields, Presby environmental infiltrators. In a lot of cases, one system may not be any better than another, in which case location, available supplies and materials can have the greatest influence on your system design.
Holt LandWorks, has Completed training, with Eljen and other manufactures of subsurface waste water treatment systems, and is a Certified Maine Onsite subsurface Wastewater Disposal System Installer (Certificate # 912). We value education and continue to seek the best possible solutions for out customers needs, with the least amount of environmental impact. Thanks for reading and we look forward to working with you soon.
Dump trucks are a vital component in the construction industry
The History of Dump Trucks
The demand for dump trucks/dumper trucks/tipper trucks has been steady since the late 19th century. They were used in coal mines and railroad constructions. The earliest dump mechanism comprised a tub-like container with a front and rear door. It was towed by a pair of horses pulling the load. Once the cargo reached its intended destination, the operator opened the rear door, and the load-bearing container slid down, dumping the cargo.
Leave a Comment / Land Clearing, Site Preparation, Land Grading / By Holtlandworks.
Lot clearing, the planning required for a house / building lot should not be overlooked and you should plan to spend some time on this phase of the project.
Clearing a plot of land is an important step in the construction process. There are many reasons one might need to clear land. They can include the following:
New construction of building or dwelling.
Addition to existing structure.
Placement of Septic system
Expansion of outdoor space
Ball fields
Pastures
Parking areas
Paths and Road ways.
Why Land Clearing Is Significant When you have a new building project.
The purpose of the planning procedure is to:
To ensure the best usability of your land
Remove hazards making your project safer
Promote the growth of the landscape you want
Determine soil type and improve the health of your soil
Level the building area
Increase the value of your building lot
Enhance the aesthetics of a house lot
Overgrown and land that is not accessible in many cases are overlooked as viable building sites. In many cases with a little lot clearing and a few loads of gravel you can turn a wooded lot into a building lot and greatly increase the value of that property.
Where do you Start? Clearing Land Preparation Tips
The first step is to survey the property. This process uses any sketches or construction blueprint to identify any trees, rocks, bushes, that need to be removed. Also at this time it is wise to look at the different grades of the land.
You may need to apply for building and zoning permissions based on the region you choose for your project or home, thus it is worth waiting for clearance before you start any work.
Once you have done your survey you will want to follow the checklist below
Mark the construction site with stakes
Determine the best location for a septic system
Determine the best location for a well
Mark out access points for all phases of construction
Take in account of utilities that will need to be tied in
Apply for any permits that may be needed in your area
Check with your local zoning board
How Much Does It Cost To Clear A Land Lot In My Area?
Lightly wooded building lots can range on average from $800 to $2,500 per acre, with some significant tree removal. Alternatively, a heavily wooded lot with terran and access issues might cost up to $5,200 per acre.
Remember the first step in your development is to clear the land in preparation for your construction project. Once the land is cleared you will have a better topographical view of the land, making it easier to decide final locations and grades. This will make planning your building site easier.
The second step in any property development project is to clear land. After the area is cleared, graded, and prepared, land construction can commence.
It is essential to follow the correct process during lot clearing. Here is a brief summary of the steps involved on the building site:
Conduct a lot survey and soil testing
Demolish any existing structures, including underground infrastructure
Begin clearing bushes, timber, large rocks, and trees
Resloping the land and controlling any soil erosion
Grade the land
Contact Holt LandWorks Today!
Please don’t overlook the planning process of land clearing, it is an important phase in any successful construction project.
Contact Holt LandWorks if you are in need of materials, heavy equipment, excavation, grading, and professional land clearing services. We know exactly what you need; therefore, we focus on providing efficient services and excellent value!
Holt Landworks can help with all your Landwork Needs.
Earthwork and grading your construction site properly takes planning. To obtain, specific site contours, and to shape your sites landscape, one must accommodate a number of factors. Let’s look at a few together.
Elevations
When grading and doing earthworks for any new projects. The elevation of finished structures, such as foundations, driveways, parking lots, hardscapes, and soft landscapes, have to work together. Maximizing all of the properties useful spaces. At Holt Land works we use laser guided elevation controls grading and excavating.
Drainage
The grading of your construction site should take into account any drainage issues that maybe encountered from any new earthwork that will take place. Hiring a qualified Site planner can help. Planning ahead will reduce the possibility of any unwanted issues from arising. Contact us today for a consultation.
Erosion Control
Before any earthwork or grading starts the contractor and property owner should follow the D.E.P’s erosion control guild lines. This will ensures that your project will move along smoothly with out delays or fines.
Soil Stabilization
Earthwork grading is also done to stabilize soils. When slopes are to step soils can become unstable. Certain type of soils and aggregates are not suited for all situations. Good grade plans prevent common mistakes and will avoid erosion problems from occurring.
Lets look at some projects that require landwork and grading
Site Development
Grading and earthwork is key component in all site development and one of the largest part of a successful project, it is important to get it right. Good grading plans need to include existing and new features, Typically being prepared in 2 phases. A good surveyor can help with the existing topography, and document this. Next a grading design is usually drafted by a licensed architect or civil engineer. the finished grading design can then be laid over the original topographic.
Building Demolition / Land Clearing
When doing demolition and Land Clearing, a grading plan my be necessary to contain or reroute any unwanted runoff from the project. Consulting with a reputable earthworks contractor can protect you from many common pitfalls.
Landscaping Removals & Installations
The removal or installation of any landscaping, such as patios, walkways, retaining wall may require regrading of the surrounding area. Again, to ensure proper runoff and function of the landscaping. While maintain an esthetic flow.
In Summery
As we have demonstrated good grade plans along with a good landworks contractor, are key element in any successful project. We have only listed a few projects that require grading and a good plan. If you don’t see your project listed no worries. Just contact us and we will be glad to help.
Your property needs to properly drain water, to protect your home. The Building foundations need to be protected from pooling water and seepage.
The property surrounding your structure needs to be engineered to divert water from storms, away from any areas that pooling water will cause issues.
If your dwelling or house is in a lower elevation than the surrounding area, you may receive run off water. In this case it may be necessary to excavate your property. Excavation of trenches and the installation of French drains, in is a great solution to divert the water flow away from buildings.
French drains involve digging a trench, in which a drain pipe is laid, then surrounding the pipe with crushed stone. Both the pipe and stone are then covered with sand and topsoil as needed. There are variations.
Trenching as a Tool in Draining Your Property
It is best to work with an experienced Land works contractor, to determine the best drainage system your property needs, but here are some basic factors that should be considered:
Where is the water coming from? Are you downhill from other properties that are draining water into your property? Are you on a flat area where water simply pools and is absorbed into the soil? Is it just heavy storms that cause the problem, or regular weather?
Where does the water currently go? Is it pooling against your foundation? Is water flow eating away at soil structures around the foundation, driveway or other property features? What needs to be protected?
Where should it be routed? Where does the excavator need to dig? Is there a public storm drain at the foot of your property? Do you need to avoid channeling water onto a neighbor’s property? Is there an open, sandy place on your property where storm runoff could harmlessly pool and percolate into the soil?
How best to channel the water in the right direction? What drainage design do you need? Where should the trenches be dug to build the French Drains? Are there other techniques, like terracing, that might also be effective?
Important: Check your community regulatory codes and utilities maps before bringing in a Bay Area team to Bay Area excavation team to improve your property.
French Drains need some slope to work. Trenching lines should be plotted out before the backhoes start digging. A grade of 1% (a drop of 1 foot for every 100 feet in length) is often recommended; others advise a drop of 6 inches for every 100 feet, leading to the water’s desired destination.
Trench width will depend on the magnitude of your drainage problem. Bigger moisture problems call for wider trenches.
How Much Does Septic System Installation Cost? [Guide To Septic Tanks replacement System]
Many factors can influence how much a new septic system can cost. Whether you’re building a new property or want to replace your current septic tank system, there are some things to keep in mind.
If you’re looking to installing a new tank, keep reading for an overview of its costs.
Distribution Manifold
What Is A Septic System?
In simple words, a septic system is an underground treatment structure created when there’s not a traditional sewer system available; these systems are more common in rural areas, although they may also be seen in some cities.
A conventional septic system has three primary parts: The tank system, the distribution box, and a leach field, which is responsible for absorbing soil. In essence, the septic tank systems’ job is to separate wastewater from organic matter, such as solids, grease, or oil.
How Much Does A Septic Tank System Cost?
On average, installing new tanks on your property may range from $3,000 and $10,000, depending on a few factors. The national average for septic system installation costs is approximately $6,000.
Tank with built in pump station
The most common factors that will affect the cost to replace a septic tank or your leach field:
The Number of Bedrooms: This is the deciding factor when calculating or designing a septic system. On average, a three-bedroom house needs a 1,000-gallon tank; this tank may range from $1300 to $1,800. Homes with more bedrooms may require a tank larger than 1,000-gallon tanks.
Tank Gallon Size: Larger tanks cost more and require more work to install. The bigger the tank, the higher the cost. Keep in mind that your local precast company can usually supply tanks from 1,000 up to 3,000-gallon tanks. Tanks of this size can accommodate most buildings, and these may range from $1,300 to $4,000.
General System Type: There are three primary system types: Mound septic system, sand filter system, and pressure distribution system. Mound systems are the most expensive to install at $15,000 on average, whereas the sand filter systems are a bit more affordable, ranging from $6,000 to $10,000.
Septic Tank Type: The most command tank type is the concrete septic tank, plastic tanks are also used. The concrete septic tank is more durable On the other hand, plastic septic tanks have their place in certain situation. We recommend concrete tanks over the other alternatives, when ever possible.
Septic System Type: A site survey will determine the best septic system for your location and land layout. If properly installed and maintained they are all very durable, and will give the owner years of trouble free service.
Anaerobic or Aerobic Systems: The aerobic system injects oxygen into the treatment tank. The additional oxygen increases natural bacterial activity within the system, in many cases allowing for smaller leach fields.
On the other hand, the anaerobic septic system uses oxygen-averse bacteria to take care of the waste. The anaerobic system are the most cost effective were they can be used. If you live on the water of have a smaller lot a aerobic system my be your choice.
Frequently Asked Questions
How Much Time Do Septic Systems Take To Install?
Depending on the land conditions and the team working on the septic tank installation, the process may take approximately a week, sometimes more time is needed depending on plumbing and wiring required with certain systems.
How Can You Tell If You Need A New System?
Your System may need attention if your are experiencing the following problems:
Bad smells
Standing water
Old system
Patchy grass
Slow Drains
Adding onto your house
If you have questions concerning any of these please contact us and we will provide you with the best solution to your problem.
Where Can You Find Septic System Installers?
A septic system cost or septic tank costs, in general, may vary depending on the case. Thankfully, we have all the information you need, including the cost to install anything you want.
Holt Land Work: We are servicing the Central Maine area, and we’re ready to provide you with assistance, if you’re looking for or any other information.
